OEM: 06F 198 107 A

Our sprocket is of a new solid design type and unlike the. prone to fail OEM item, it has no integrated dampener. The design and manufacturing is done by ourselves right here in Sweden, guaranteeing the highest quality.

Please note that the warranty is only valid if the chain, tensioner and crankshaft sprocket is replaced as well. The whole kit can be purchased from us and is found HERE.

Also check out our own Wasa Motor original solution for deleting your balance shafts HERE. (Balance shaft delete)

Standard dimension.

A very common issue with the TFSI 2.0 EA113 engines is the low oil pressure warning. Due to a design flaw in the oil pump module, micro particles in the oil can cause partial or total loss of oil pressure. Our solution prevents and fixes this particular fault and will not wear out, ensureing enough lubrication throughout the engine at all engine speeds.

Symptoms:

The symptoms can vary from a complete loss of oil pressure, to the warning light flashing when decelerating. In some cases the fault only presents itself an a particular range of RPM.

Developed and manufactured in sweden.

Please check both the engine codes tab and see the images to compare if the item fits you specific model.

In order to exchange all four the engine will have to be removed from the vehicle, but only replacing the first three will make a tremendous difference.

• The original Wasa Motor Freewhweel balancer shaft delete kit
• Oil pump / Balance shaft Chain, Open type with chain lock

This variation is used when balance shaft sprocket has failed and the chain needs replacing. Because of the open type chain with a lock is used, the repair can be carried out by only disassembly of the oil pan. No need to remove the whole cam belt drive.

Please be aware that this type of chain can only be used together with the Wasa Motor Freewheel solution. This is due  to excessive force, adding to much stress on the chain, when used with balance shafts engaged.

THE ORIGINAL WASA MOTOR

The Wasa Motor Freewheel is an ingenious solution for the highly recommended balancer shaft delete, to prevent failure of the drive sprocket.
The Freewheel is also a great alternative to buying a new module in case your balance shafts are seized up.

This is well thought through product, which is invented, developed and manufactured by ourselves in sweden.
With hundreds sold and zero complaints, it is safe to say that this is a proven reliable and high quality product.

Benefits of the Freewheel balance shaft delete

What you get:

• Better throttle response
• Quicker engine RPM acceleration
• Slight higher HP output
• Better fuel economy

what you never need to worry about again:

• Balance shaft sprocket disintegrating
• Balnce shafts seizing up
• Journals of the balance shafts becoming worn

Why the wm freewheel is the way to go:

• Easy bolt-on installation
• No need to cut any gears
• No need to mount a different type oil pump
• Can be used to prevent or repair damage
• Lifelong warranty on the Frewheel
• Is fully reversible to OEM

You can read more about the Wasa Motor  Freewheel on the dedicated page.

Take me to the Freewheel page

Blog posts on the subject

The infamous balance shaft sprocket of the 2.0 TFSI – The issue and what to do about it!

23 Comments

27
Oct

This variation is mainly used as a preventive procedure, before your oil pump and balance shaft assembly fails.
If yours is already broken, further parts may be required. For repairs, please check out the other freewheel kits provided by us.

THE ORIGINAL WASA MOTOR

The Wasa Motor Freewheel is an ingenious solution for the highly recommended balance shaft delete, to prevent failure of the drive sprocket.
The Freewheel is also a great alternative to buying a new module in case your balance shafts are seized up.

This is well thought through product, which is invented, developed and manufactured by ourselves in sweden.
With hundreds sold and zero complaints, it is safe to say that this is a proven reliable and high quality product.

Benefits of the Freewheel balance shaft delete

What you get:

• Better throttle response
• Quicker engine RPM acceleration
• Slight higher HP output
• Better fuel economy

what you never need to worry about again:

• Balance shaft sprocket disintegrating
• Balance shafts seizing up
• Journals of the balance shafts becoming worn

Why the wm freewheel is the way to go:

• Easy bolt-on installation
• No need to cut any gears
• No need to mount a different type oil pump
• Can be used to prevent or repair damage
• Lifelong warranty on the Freewheel
• Is fully reversible to OEM

You can read more about the Wasa Motor  Freewheel on the dedicated page.

Take me to the Freewheel page

Blog posts on the subject

The infamous balance shaft sprocket of the 2.0 TFSI – The issue and what to do about it!

23 Comments

27
Oct