Comments on: Wasa Oil Pressure Fix

By: scottatkins01

scottatkins01 — Wed, 01 Oct 2025 19:36:37 +0000

200k mile BWA project track car, we were getting constant oil pressure issues. Hot idle was 0.5BAR, after fitting this oil pressure fix AND the WASA piston jets, we now have 1.8BAR hot idle with 5BAR high RPM, eliminating all our existing oil pressure issues and able to enjoy many laps out on track! This kit was very easy to install and I can’t recommend this enough for anyone with oil pressure issues! 100% recommend both oil pressure fix + piston jet replacement at same time!

By: Wasa Motor

Wasa Motor — Thu, 11 May 2023 21:37:07 +0000

In reply to Antonio.

For EA113 TFSI engines only. In some cases the FSI has the same module, but it’srather rare.

By: Antonio

Antonio — Wed, 10 May 2023 16:24:32 +0000

is it for all ea113 oil pumps/balance shaft?

By: Wasa Motor

Wasa Motor — Wed, 28 Dec 2022 18:45:38 +0000

In reply to Darko.

Hi,
The wasa oil pressure fix uses its own internal spring. The OE spring is not used.

/Hannes

By: Darko

Darko — Wed, 28 Dec 2022 12:43:57 +0000

Naručio sam vaš proizvod. Moje pitanje je dali ide opruga sa starog ventila u vaš wasa novi ventil.

By: Wasa Motor

Wasa Motor — Mon, 20 Jun 2022 11:42:37 +0000

In reply to jari.tuomenoja.

Hi Jari,
I’m glad to hear you got the issue resolved and are happy with the product.

/ Hannes

By: jari.tuomenoja

jari.tuomenoja — Fri, 17 Jun 2022 16:19:25 +0000

Hi
Great Product.
Audi A6 TSFI oil preasure problem was history. Big thanks !

By: Wasa Motor

Wasa Motor — Tue, 20 Apr 2021 07:36:57 +0000

In reply to Miguel Ángel.

Hi Miguel,
the hole is drilled as a pressure reference. The OE system uses the pickup tube as its reference, which causes issues if the screen gets even partially blocked.

/Hannes

By: Miguel Ángel

Miguel Ángel — Sun, 18 Apr 2021 20:36:30 +0000

Good morning, I had an oil pressure problem for 2 seconds when it was coming to many revolutions and I had to go slow suddenly to park, it is a golf 6R ea113 and I was looking to eliminate the axles and the valve is there. I see that the valve could be the problem. But looking at the facilities, I don’t quite understand what to make a hole in the pump.

By: Russell C.

Russell C. — Sun, 15 Nov 2020 19:16:41 +0000

The infamous oil pressure light took my 06 A4 down for over a year. This brought the old oil pump back to life and I couldn’t be happier. Easy installation and worth the effort.